Product Review: MVP Tensor

June 7, 2013 / P.J. / 2 Comments

By Steve Hill, Jack Trageser, and P.J. Harmer – Rattling Chains staff

When I spoke with Chad and Brad Richardson, the brothers behind MVP Disc Sports, for an article late last year, I specifically asked them how their signature overmold would translate to a truly overstable disc design.

To that point, MVP had not released anything with serious beef to it, but Chad mentioned that, due to the gyroscopic nature of the overmold, their version of a meathook would have more of a forward-penetrating, transitional fade as opposed to just dumping off at the end.

The MVP Tensor.

With the Tensor, MVP’s new overstable mid-range, they nailed it spot on.

Packing plenty of stability in the beginning of its flight and a nice, late, smooth fade, the Tensor is an excellent addition to MVP’s current crop of mid-ranges.

I was able to throw a 167-gram Tensor, which is a bit lighter than I normally use for mid-ranges. However, I think the lighter weight in this case was helpful, as I was still able to get the Tensor up to its cruising speed with a little less effort. When thrown off the tee, I was getting dead straight for about 85 percent of the flight, with a solid finish right (I’m a lefty). Without sounding blasphemous, off the tee, it flew like a shorter Teebird.

But this disc is no one-trick pony. While it is overstable enough to provide a hook, it handles low lines very well and, when powered up and thrown low, loses the fade and just becomes a laser. When powered down, it can be used on short flex shots around trees to provide a reliable landing right near the basket.

The best part of this disc, though, is how it resists turning over, even when torqued with bad form. I have done it quite a few times with the Tensor off the tee, where I try and overpower it to make sure I get some distance, and rather than holding left like a lot of mids will, it will nicely “S” back to its fade. In this sense, it is extremely reliable.

Continue reading →

Product Review: MVP Tangent

March 6, 2013 / P.J. / Leave a comment

By Steve Hill and P.J. Harmer — Rattling Chains staff

At this point, the output from the MVP Disc Sports factory has to be nearing the level of its automotive counterparts in nearby Detroit.

The Tangent, scheduled to hit stores this Friday, is billed as a slightly understable mid-range driver. With this release, MVP has knocked out four molds since October. And while most MVP fans were probably hoping for the brand’s next offering to be a distance driver, I feel confident in saying the Tangent will be more than enough to hold the devotees over.

More importantly, I think it will bring a lot of new MVP throwers aboard the bandwagon.

See, while MVP’s prior offerings have been enjoyable, none have been quite so effortless to work and manipulate as the Tangent. Case in point — my first throw in the field with the 170-gram, lime-green tester I was given produced an audible “holy crap.” With an easy, smooth toss, this disc got up and ran straight out to about 250 feet, gliding with ease to a soft landing almost straight in line with its release. For me, that’s a good pull with a mid.

But anything can happen in the field, so I knew I had to temper my expectations for this disc until I gave it a true workout on the course. Content to continue working with the 170-gram disc from the field, I decided to use it exclusively for a round of 18 at Brengle Terrace Park in Vista, Calif., to try and unleash all of its potential.

And, I knew I needed to have some additional perspective on how it flew. So, I took it out to the course with the Mikes, two guys I play with who are, without question, huge fans of the MVP Axis, the company’s stable mid-range. I knew that, with their bigger arms and MVP experience, they would be a good measure for how the Tangent would perform.

Continue reading →

Product Review: MVP Amp

December 13, 2012 / P.J. / Leave a comment

By Steve Hill, P.J. Harmer and Dave Coury — For Rattling Chains

I’ll be the first to admit that I am a fan of MVP Disc Sports. In the company’s short existence, I have tried all five of its molds, and have bagged three for a nice driver-midrange-putter set-up – the Volt, Axis, and Anode.

At the same time, I love understable plastic. The Innova Roadrunner and Latitude 64 Fuse – a couple of the flippiest discs on the market – are staples in my bag for their control and ease of use.

So, when MVP announced it was releasing the Amp, an understable fairway driver, I was excited. One of my favorite brands releasing my favorite kind of disc, obviously, had some appeal, and I knew I wanted to throw it.

One thing I knew coming into the review is that MVP discs – whether it is due to the overmold, or some other phenomenon – tend to require more snap and spin to fly as advertised. To wit, it took me a month to really dial in the Axis and learn how to throw it correctly, which seemed odd for a mid-range.

This is almost a blessing and a curse for new users of MVP discs. Stick with them, and your snap will likely improve. But it can be extremely frustrating to click with the disc at first, which can make it easy to give up on and move to an old standby.

And even though I knew this would be the case with the Amp, I still found myself frustrated with my first few throws with it. Since it was advertised as understable, I expected a nice gentle turn out of the box, with maybe a little fade.

I know it is user error, but If I wasn’t really concentrating the first couple times I threw this disc, it would hyzer out on me real quick, leaving me a little demoralized and ready to throw in the towel.

Continue reading →

Oh, brothers: MVP Disc Sports turns from hobby to profession

December 7, 2012 / P.J. / Leave a comment

By Steve Hill — Rattling Chains staff

The story is the same for every disc golf manufacturer.

Follow along with me if you’ve heard this one before: Two teenagers find disc golf and fall in love with the sport. At the same time, the young men spend their summers working for their father, who just so happens to own a plastic injection molding company.

One day, the teens approach their dad with the idea of making a golf disc and, thinking it will be a good learning experience, he gives them the green light. The disc catches on and soon, a company is born.

Wait, that’s not how every disc golf brand is created? Well, chalk up another point in the “unique” column for MVP Disc Sports.

Now 21 and 23 years old, respectively, brothers Brad and Chad Richardson have used a grassroots following to build MVP into a competitive company that continues to strengthen its position in the market via a new spin on disc technology.

And it all started, oddly enough, with a car door handle.

‘A Good Lesson’

Maple Valley Plastics, owned by Don Richardson, has been in business since 1967. In addition to making a variety of products for government contracts and toy companies, the primary focus of the business is the automotive industry. After seeing an interior door handle that was made of a stiff core material and covered with a rubber-like material for a soft feel, Chad was inspired to apply the design to a golf disc.

“This led to the idea of a softer material on the outside of the disc for chain-grabbing properties in a putter,” Brad said. “But rather quickly it evolved into the discovery of using a dense, rubber-like material for an enhanced gyroscopic property of a disc.”

Continue reading →